Back to the Main Log


Page 1 of 5
   Next >
Last Page


Date: 7/9/2000

Started cutting and welding upper portion of engine...

Started cutting and welding upper portion of engine mount.  

Task Hours: 2

Date: 7/15/2000

Fabricated more of the engine mount for the Subaru...

Fabricated more of the engine mount for the Subaru engine.  It's really coming along nice.  Tomorrow I'm starting on the fuselage portion of the mount.

Task Hours: 6

Date: 7/16/2000

Started fabricating the fuselage portion of the engine...

Started fabricating the fuselage portion of the engine mount.  Don't look too close to the welds.  I'm no expert, but, at least I know I'm getting good penetration.

Task Hours: 5

Date: 8/7/2000

Fabricated most of the engine mount.

Fabricated most of the engine mount.

Task Hours: 0

Date: 8/10/2000

Assembled engine mount for the first time.

Assembled engine mount for the first time.

Task Hours: 1

Date: 9/9/2000

Over the past month and a half, I have completed fabricating...

Over the past month and a half, I have completed fabricating and welding the engine mount.  I have also fabricated the alternator mounts.  I am currently fabricating the new intake manifold.  

Task Hours: 8

Date: 9/22/2000

Here are several images of my completed engine mount...

Here are several images of my completed engine mount.  This is for the EJ-22 Subaru engine.

Task Hours: 0

Date: 9/22/2000

Here are several images of my completed engine mount...

Another angle.

Task Hours: 0

Date: 9/22/2000

Here are several images of my completed engine mount...

And one more.

Task Hours: 0

Date: 9/22/2000

Here are several images of my completed engine mount...

This is a close-up of the rubber bushings I used.

Task Hours: 0

Date: 9/29/2000

Started fabricating the intake manifold runners and...

Started fabricating the intake manifold runners and air horns.  

Task Hours: 2

Date: 9/29/2000

Reinstalled engine and mount on firewall.

Reinstalled engine and mount on firewall.

Task Hours: 1

Date: 10/1/2000

Fabricated intake manifold for Subaru engine to fit...

Fabricated intake manifold for Subaru engine to fit inside Glasair cowling. (I thought about removing these pictures altogether, but I decided they are too entertaining)

Task Hours: 8

Date: 10/1/2000

These are addtional photos of the intake and engine...

These are additional photos of the intake and engine.

Task Hours: 0

Date: 10/1/2000

These are addtional photos of the intake and engine...

These are additional photos of the intake and engine. (yep, for a moment, I thought I was actually going to use this manifold, a very brief moment :-)

Task Hours: 0


Page 1 of 5
   Next >